#[repr(transparent)]
pub struct FileEnumerator { /* private fields */ }

Implementations

Trait Implementations

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

Formats the value using the given formatter. Read more

Feeds this value into the given Hasher. Read more

Feeds a slice of this type into the given Hasher. Read more

The type of the elements being iterated over.

Advances the iterator and returns the next value. Read more

Returns the bounds on the remaining length of the iterator. Read more

Consumes the iterator, counting the number of iterations and returning it. Read more

Consumes the iterator, returning the last element. Read more

🔬 This is a nightly-only experimental API. (iter_advance_by)

Advances the iterator by n elements. Read more

Returns the nth element of the iterator. Read more

Creates an iterator starting at the same point, but stepping by the given amount at each iteration. Read more

Takes two iterators and creates a new iterator over both in sequence. Read more

‘Zips up’ two iterators into a single iterator of pairs. Read more

🔬 This is a nightly-only experimental API. (iter_intersperse)

Creates a new iterator which places a copy of separator between adjacent items of the original iterator. Read more

🔬 This is a nightly-only experimental API. (iter_intersperse)

Creates a new iterator which places an item generated by separator between adjacent items of the original iterator. Read more

Takes a closure and creates an iterator which calls that closure on each element. Read more

Calls a closure on each element of an iterator. Read more

Creates an iterator which uses a closure to determine if an element should be yielded. Read more

Creates an iterator that both filters and maps. Read more

Creates an iterator which gives the current iteration count as well as the next value. Read more

Creates an iterator which can use the peek and peek_mut methods to look at the next element of the iterator without consuming it. See their documentation for more information. Read more

Creates an iterator that skips elements based on a predicate. Read more

Creates an iterator that yields elements based on a predicate. Read more

Creates an iterator that both yields elements based on a predicate and maps. Read more

Creates an iterator that skips the first n elements. Read more

Creates an iterator that yields the first n elements, or fewer if the underlying iterator ends sooner. Read more

An iterator adapter similar to fold that holds internal state and produces a new iterator. Read more

Creates an iterator that works like map, but flattens nested structure. Read more

Creates an iterator that flattens nested structure. Read more

Creates an iterator which ends after the first None. Read more

Does something with each element of an iterator, passing the value on. Read more

Borrows an iterator, rather than consuming it. Read more

Transforms an iterator into a collection. Read more

🔬 This is a nightly-only experimental API. (iterator_try_collect)

Fallibly transforms an iterator into a collection, short circuiting if a failure is encountered. Read more

🔬 This is a nightly-only experimental API. (iter_collect_into)

Collects all the items from an iterator into a collection. Read more

Consumes an iterator, creating two collections from it. Read more

🔬 This is a nightly-only experimental API. (iter_partition_in_place)

Reorders the elements of this iterator in-place according to the given predicate, such that all those that return true precede all those that return false. Returns the number of true elements found. Read more

🔬 This is a nightly-only experimental API. (iter_is_partitioned)

Checks if the elements of this iterator are partitioned according to the given predicate, such that all those that return true precede all those that return false. Read more

An iterator method that applies a function as long as it returns successfully, producing a single, final value. Read more

An iterator method that applies a fallible function to each item in the iterator, stopping at the first error and returning that error. Read more

Folds every element into an accumulator by applying an operation, returning the final result. Read more

Reduces the elements to a single one, by repeatedly applying a reducing operation. Read more

🔬 This is a nightly-only experimental API. (iterator_try_reduce)

Reduces the elements to a single one by repeatedly applying a reducing operation. If the closure returns a failure, the failure is propagated back to the caller immediately. Read more

Tests if every element of the iterator matches a predicate. Read more

Tests if any element of the iterator matches a predicate. Read more

Searches for an element of an iterator that satisfies a predicate. Read more

Applies function to the elements of iterator and returns the first non-none result. Read more

🔬 This is a nightly-only experimental API. (try_find)

Applies function to the elements of iterator and returns the first true result or the first error. Read more

Searches for an element in an iterator, returning its index. Read more

Searches for an element in an iterator from the right, returning its index. Read more

Returns the maximum element of an iterator. Read more

Returns the minimum element of an iterator. Read more

Returns the element that gives the maximum value from the specified function. Read more

Returns the element that gives the maximum value with respect to the specified comparison function. Read more

Returns the element that gives the minimum value from the specified function. Read more

Returns the element that gives the minimum value with respect to the specified comparison function. Read more

Reverses an iterator’s direction. Read more

Converts an iterator of pairs into a pair of containers. Read more

Creates an iterator which copies all of its elements. Read more

Creates an iterator which clones all of its elements. Read more

Repeats an iterator endlessly. Read more

Sums the elements of an iterator. Read more

Iterates over the entire iterator, multiplying all the elements Read more

Lexicographically compares the elements of this Iterator with those of another. Read more

🔬 This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function. Read more

Lexicographically compares the elements of this Iterator with those of another. Read more

🔬 This is a nightly-only experimental API. (iter_order_by)

Lexicographically compares the elements of this Iterator with those of another with respect to the specified comparison function. Read more

Determines if the elements of this Iterator are equal to those of another. Read more

🔬 This is a nightly-only experimental API. (iter_order_by)

Determines if the elements of this Iterator are equal to those of another with respect to the specified equality function. Read more

Determines if the elements of this Iterator are unequal to those of another. Read more

Determines if the elements of this Iterator are lexicographically less than those of another. Read more

Determines if the elements of this Iterator are lexicographically less or equal to those of another. Read more

Determines if the elements of this Iterator are lexicographically greater than those of another. Read more

Determines if the elements of this Iterator are lexicographically greater than or equal to those of another. Read more

🔬 This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this iterator are sorted. Read more

🔬 This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this iterator are sorted using the given comparator function. Read more

🔬 This is a nightly-only experimental API. (is_sorted)

Checks if the elements of this iterator are sorted using the given key extraction function. Read more

This method returns an Ordering between self and other. Read more

Compares and returns the maximum of two values. Read more

Compares and returns the minimum of two values. Read more

Restrict a value to a certain interval. Read more

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

This method returns an ordering between self and other values if one exists. Read more

This method tests less than (for self and other) and is used by the < operator. Read more

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more

This method tests greater than (for self and other) and is used by the > operator. Read more

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more

Returns the type identifier of Self.

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Upcasts an object to a superclass or interface T. Read more

Upcasts an object to a reference of its superclass or interface T. Read more

Tries to downcast to a subclass or interface implementor T. Read more

Tries to downcast to a reference of its subclass or interface implementor T. Read more

Tries to cast to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more

Tries to cast to reference to an object of type T. This handles upcasting, downcasting and casting between interface and interface implementors. All checks are performed at runtime, while downcast and upcast will do many checks at compile-time already. Read more

Casts to T unconditionally. Read more

Casts to &T unconditionally. Read more

Returns the argument unchanged.

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

The type of the elements being iterated over.

Which kind of iterator are we turning this into?

Creates an iterator from a value. Read more

Returns true if the object is an instance of (can be cast to) T.

Returns the type of the object.

Returns the ObjectClass of the object. Read more

Returns the class of the object.

Returns the class of the object in the given type T. Read more

Returns the interface T of the object. Read more

Similar to Self::set_property but fails instead of panicking.

Sets the property property_name of the object to value value. Read more

Similar to Self::set_property but fails instead of panicking.

Sets the property property_name of the object to value value. Read more

Similar to Self::set_properties but fails instead of panicking.

Sets multiple properties of the object at once. Read more

Similar to Self::set_properties_from_value but fails instead of panicking.

Sets multiple properties of the object at once. Read more

Similar to Self::property but fails instead of panicking.

Gets the property property_name of the object and cast it to the type V. Read more

Similar to Self::property_value but fails instead of panicking.

Gets the property property_name of the object. Read more

Check if the object has a property property_name of the given type_. Read more

Get the type of the property property_name of this object. Read more

Get the ParamSpec of the property property_name of this object.

Return all ParamSpec of the properties of this object.

Freeze all property notifications until the return guard object is dropped. Read more

Set arbitrary data on this object with the given key. Read more

Return previously set arbitrary data of this object with the given key. Read more

Retrieve previously set arbitrary data of this object with the given key. Read more

Set arbitrary data on this object with the given key. Read more

Return previously set arbitrary data of this object with the given key. Read more

Retrieve previously set arbitrary data of this object with the given key. Read more

Block a given signal handler. Read more

Unblock a given signal handler.

Stop emission of the currently emitted signal.

Stop emission of the currently emitted signal by the (possibly detailed) signal name.

Similar to Self::connect but fails instead of panicking.

Connect to the signal signal_name on this object. Read more

Similar to Self::connect_id but fails instead of panicking.

Connect to the signal signal_id on this object. Read more

Similar to Self::connect_local but fails instead of panicking.

Connect to the signal signal_name on this object. Read more

Similar to Self::connect_local_id but fails instead of panicking.

Connect to the signal signal_id on this object. Read more

Similar to Self::connect_unsafe but fails instead of panicking.

Connect to the signal signal_name on this object. Read more

Similar to Self::connect_unsafe_id but fails instead of panicking.

Similar to Self::connect_closure but fails instead of panicking.

Connect a closure to the signal signal_name on this object. Read more

Similar to Self::connect_closure_id but fails instead of panicking.

Connect a closure to the signal signal_id on this object. Read more

Limits the lifetime of closure to the lifetime of the object. When the object’s reference count drops to zero, the closure will be invalidated. An invalidated closure will ignore any calls to Closure::invoke. Read more

Connect to the signal signal_id on this object. Read more

Similar to Self::emit but fails instead of panicking.

Emit signal by signal id. Read more

Similar to Self::emit_with_values but fails instead of panicking.

Same as Self::emit but takes Value for the arguments.

Similar to Self::emit_by_name but fails instead of panicking.

Emit signal by its name. Read more

Similar to Self::emit_by_name_with_values but fails instead of panicking.

Emit signal by its name. Read more

Similar to Self::emit_with_details but fails instead of panicking.

Emit signal by signal id with details. Read more

Similar to Self::emit_with_details_and_values but fails instead of panicking.

Emit signal by signal id with details. Read more

Disconnect a previously connected signal handler.

Connect to the notify signal of the object. Read more

Connect to the notify signal of the object. Read more

Connect to the notify signal of the object. Read more

Notify that the given property has changed its value. Read more

Notify that the given property has changed its value. Read more

Downgrade this object to a weak reference.

Bind property source_property on this object to the target_property on the target object. Read more

Returns the strong reference count of this object.

Ensures that the type has been registered with the type system.

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into)

Uses borrowed data to replace owned data, usually by cloning. Read more

Converts the given value to a String. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.